unisonic technologies co., ltd pumt1 pnp silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2010 unisonic technologies co., ltd qw-r218-001 .c pnp general purpose dual transistor ? description two independently operating pnp transistors. ? features * low current (max.100ma) * low voltage (max.40v) * reduces number of components and board space. * complement to pumx1. ? applications *general purpose switch ing and amplification. ? equivalent circuit tr1 tr2 12 3 64 5 ? ordering information ordering number pin assignment lead free halogen free package 12 3 4 5 6 packing PUMT1L-AL6-R pumt1g-al6-r sot-363 e1 b1 c2 e2 b2 c1 tape reel ? marking
pumt1 pnp silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r218-001.b the following characteristics apply to both tr1 and tr2 . ? absolute maximum ratings (ta=25c) parameter symbol rating unit collector-base voltage v cbo -50 v collector-emitter voltage v ceo -40 v emitter-base voltage v ebo -5 v collector current (dc) i c -100 ma peak collector current i cm -200 ma peak base current i bm -200 ma collector power dissipation (total) p c 300 mw junction temperature t j 150 c storage temperature t stg -65 ~ +150 c note : absolute maximum ratings are those values beyo nd which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (ta=25c) parameter symbol condition min typ max unit i e =0, v cb =-30v -100 na collector cut-off current i cbo i e =0, v cb =-30v, t j =150c -10 a emitter cut-off current i ebo v eb =-4v, i c =0 -100 na dc current gain h fe i c =-1ma, v ce =-6v 120 collector-emitter satu ration voltage v ce(sat) i c =-50ma, i b =-5ma (note 1) -200 mv collector capacitance cc i e =ie=0, v cb =-12v, f=1mhz 2.2 pf transition frequency f t i c =-2ma, v ce =-12v, f=100mhz 100 mhz note: 1. pulse test: pulse width 300 s, duty cycle 2.0% utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
